B2943 DTC For Mitsubishi Jeep
Mitsubishi Jeep Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Mitsubishi Jeep engine control system detects a problem, the computer stores the diagnostic trouble
code B2943 in its memory.
To figure out what is wrong with your vehicle you must first extract the B2943 DTC For Mitsubishi Jeep.
To solve B2943 Mitsubishi Jeep problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
B2943 Mitsubishi Jeep DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 2 |
MFG - Manufacturer Specific |
| 9 |
Transmission |
| 4 |
Control Module Throttle Actuator Position Performance |
| 3 |
TFP Valve Position Switch-Drive Without Drive Ratio |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. B2943 Mitsubishi Jeep code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Mitsubishi car models :
|
The listed Mitsubishi models will give information about B2943 DTC.
|
