B29B7 DTC For Ford Kuga 2
Ford Kuga 2 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Ford Kuga 2 engine control system detects a problem, the computer stores the diagnostic trouble
code B29B7 in its memory.
To figure out what is wrong with your vehicle you must first extract the B29B7 DTC For Ford Kuga 2.
On 1999 and later B29B7 Ford Kuga 2 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
B29B7 Ford Kuga 2 DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 2 |
MFG - Manufacturer Specific |
| 9 |
Transmission |
| B |
BBV Sensor Circuit Low Voltage |
| 7 |
Cruise Control System - Vehicle Accel Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. B29B7 Ford Kuga 2 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Ford car models :
|
The listed Ford models will give information about B29B7 DTC.
|
