B3004 DTC For Ford Bantam
Ford Bantam Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Ford Bantam engine control system detects a problem, the computer stores the diagnostic trouble
code B3004 in its memory.
To figure out what is wrong with your vehicle you must first extract the B3004 DTC For Ford Bantam.
B3004 Ford Bantam engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
B3004 Ford Bantam DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 3 |
SAE - Generic |
| 0 |
Transmission |
| 0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the B3004 Ford Bantam code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Ford car models :
|
The listed Ford models will give information about B3004 DTC.
|
