B3011 DTC For Ford Expedition 2
Ford Expedition 2 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Ford Expedition 2 engine control system detects a problem, the computer stores the diagnostic trouble
code B3011 in its memory.
To figure out what is wrong with your vehicle you must first extract the B3011 DTC For Ford Expedition 2.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check B3011 Ford Expedition 2 that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
B3011 Ford Expedition 2 DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 3 |
SAE - Generic |
| 0 |
Transmission |
| 1 |
IC Circuit High Voltage |
| 1 |
PCM Stack Overrun |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. B3011 Ford Expedition 2 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Ford car models :
|
The listed Ford models will give information about B3011 DTC.
|
