B3105 DTC For Bentley S2
Bentley S2 Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Bentley S2 engine control system detects a problem, the computer stores the diagnostic trouble
code B3105 in its memory.
To figure out what is wrong with your vehicle you must first extract the B3105 DTC For Bentley S2.
B3105 Bentley S2 engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
B3105 Bentley S2 DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 3 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
| 5 |
Cruise Inhibit Control Circuit |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the B3105 Bentley S2 code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Bentley car models :
|
The listed Bentley models will give information about B3105 DTC.
|
