B3113 DTC For Bentley Mark Vi
Bentley Mark Vi Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Bentley Mark Vi engine control system detects a problem, the computer stores the diagnostic trouble
code B3113 in its memory.
To figure out what is wrong with your vehicle you must first extract the B3113 DTC For Bentley Mark Vi.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check B3113 Bentley Mark Vi that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
B3113 Bentley Mark Vi DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 3 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 1 |
IC Circuit High Voltage |
| 3 |
TFP Valve Position Switch-Drive Without Drive Ratio |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. B3113 Bentley Mark Vi code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Bentley car models :
|
The listed Bentley models will give information about B3113 DTC.
|
