B3124 DTC For Toyota Prius 2
Toyota Prius 2 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Toyota Prius 2 engine control system detects a problem, the computer stores the diagnostic trouble
code B3124 in its memory.
To figure out what is wrong with your vehicle you must first extract the B3124 DTC For Toyota Prius 2.
A good ground connection is also extremely important. B3124 Toyota Prius 2 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
B3124 Toyota Prius 2 DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 3 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 2 |
Cruise Control Servo Indicates Low |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. B3124 Toyota Prius 2 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Toyota car models :
|
The listed Toyota models will give information about B3124 DTC.
|
