C0103 DTC For Isuzu Vehicross
Isuzu Vehicross Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Isuzu Vehicross engine control system detects a problem, the computer stores the diagnostic trouble
code C0103 in its memory.
To figure out what is wrong with your vehicle you must first extract the C0103 DTC For Isuzu Vehicross.
On 1999 and later C0103 Isuzu Vehicross engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
C0103 Isuzu Vehicross DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 0 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
| 3 |
TFP Valve Position Switch-Drive Without Drive Ratio |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C0103 Isuzu Vehicross code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Isuzu car models :
|
The listed Isuzu models will give information about C0103 DTC.
|
