C0110 DTC For Audi 60
Audi 60 Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Supercharged Engine |
Your Audi 60 engine control system detects a problem, the computer stores the diagnostic trouble
code C0110 in its memory.
To figure out what is wrong with your vehicle you must first extract the C0110 DTC For Audi 60.
To solve C0110 Audi 60 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
C0110 Audi 60 DTC Meaning
C |
Chassis Code - Problem is controller area network wiring bus and modules. |
0 |
SAE - Generic |
1 |
Fuel And Air Metering |
1 |
IC Circuit High Voltage |
0 |
Transmission Engaged At High Throttle Angle |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C0110 Audi 60 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Audi car models :
The listed Audi models will give information about C0110 DTC.
|