C0117 DTC For Subaru R1
Subaru R1 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposite Piston Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Subaru R1 engine control system detects a problem, the computer stores the diagnostic trouble
code C0117 in its memory.
To figure out what is wrong with your vehicle you must first extract the C0117 DTC For Subaru R1.
On 1999 and later C0117 Subaru R1 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
C0117 Subaru R1 DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 0 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 1 |
IC Circuit High Voltage |
| 7 |
Cruise Control System - Vehicle Accel Too High |
If your C0117 Subaru R1 check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C0117 and engine control unit are in charge of monitoring a bunch of different C0117 DTC For Subaru R1, and if they get a reading that's a little out of whack, up pops the check engine light.
You can also check other Subaru car models :
|
The listed Subaru models will give information about C0117 DTC.
|
