C011A DTC For Subaru Tribeca
Subaru Tribeca Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Subaru Tribeca engine control system detects a problem, the computer stores the diagnostic trouble
code C011A in its memory.
To figure out what is wrong with your vehicle you must first extract the C011A DTC For Subaru Tribeca.
To solve C011A Subaru Tribeca problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
C011A Subaru Tribeca DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 0 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 1 |
IC Circuit High Voltage |
| A |
TFP Valve Position Switch-Drive Without Drive Ratio |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the C011A Subaru Tribeca code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Subaru car models :
|
The listed Subaru models will give information about C011A DTC.
|
