C0143 DTC For Alpine Coupe
Alpine Coupe Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Alpine Coupe engine control system detects a problem, the computer stores the diagnostic trouble
code C0143 in its memory.
To figure out what is wrong with your vehicle you must first extract the C0143 DTC For Alpine Coupe.
C0143 Alpine Coupe engine diagnostic code is about in terms of how often you should get your tyres rotated, it's different for every vehicle and type of tyre, but having them rotated at every oil change is a good rule of thumb. Check with the tyre manufacturer for a more specific time frame. Remember that the more often you rotate your tyres, the more evenly they'll wear, and when you have the tyres rotated, you should also get them checked for balance and alignment.
C0143 Alpine Coupe DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 0 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 4 |
Control Module Throttle Actuator Position Performance |
| 3 |
TFP Valve Position Switch-Drive Without Drive Ratio |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the C0143 Alpine Coupe code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Alpine car models :
|
The listed Alpine models will give information about C0143 DTC.
|
