C0282 DTC For Mercedes Slk 230
Mercedes Slk 230 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Mercedes Slk 230 engine control system detects a problem, the computer stores the diagnostic trouble
code C0282 in its memory.
To figure out what is wrong with your vehicle you must first extract the C0282 DTC For Mercedes Slk 230.
To solve C0282 Mercedes Slk 230 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
C0282 Mercedes Slk 230 DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 0 |
SAE - Generic |
| 2 |
Computer And Auxiliary Outputs |
| 8 |
Crankshaft Position Sensor Circuit Performance |
| 2 |
Kick-Down Switch Failed Short |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C0282 Mercedes Slk 230 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about C0282 DTC.
|
