C0942 Bmw R 1200 Gs DTC Code

Bmw R 1200 Gs Engine Specifications:

Engine Type :	Single Cylinder Engine
Cylinder Type :	Opposed Cylinder Engine
Engine Air Intake Process :	Turbocharged Engine

Your Bmw R 1200 Gs engine control system detects a problem, the computer stores the diagnostic trouble code C0942 in its memory. To figure out what is wrong with your vehicle you must first extract the C0942 DTC For Bmw R 1200 Gs.

C0942 Bmw R 1200 Gs engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)

C0942 Bmw R 1200 Gs DTC Meaning

C	Chassis Code - Problem is controller area network wiring bus and modules.
0	SAE - Generic
9	Transmission
4	Control Module Throttle Actuator Position Performance
2	Kick-Down Switch Failed Short

While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the C0942 Bmw R 1200 Gs code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.