C0942 DTC For Chrysler 2 Litre
Chrysler 2 Litre Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Turbocharged Engine |
Your Chrysler 2 Litre engine control system detects a problem, the computer stores the diagnostic trouble
code C0942 in its memory.
To figure out what is wrong with your vehicle you must first extract the C0942 DTC For Chrysler 2 Litre.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check C0942 Chrysler 2 Litre that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
C0942 Chrysler 2 Litre DTC Meaning
C |
Chassis Code - Problem is controller area network wiring bus and modules. |
0 |
SAE - Generic |
9 |
Transmission |
4 |
Control Module Throttle Actuator Position Performance |
2 |
Kick-Down Switch Failed Short |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C0942 Chrysler 2 Litre code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Chrysler car models :
The listed Chrysler models will give information about C0942 DTC.
|