C0990 DTC For Fiat 1300
Fiat 1300 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Fiat 1300 engine control system detects a problem, the computer stores the diagnostic trouble
code C0990 in its memory.
To figure out what is wrong with your vehicle you must first extract the C0990 DTC For Fiat 1300.
C0990 Fiat 1300 engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
C0990 Fiat 1300 DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 0 |
SAE - Generic |
| 9 |
Transmission |
| 9 |
TP Sensor Learn Not Complete |
| 0 |
Transmission Engaged At High Throttle Angle |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C0990 Fiat 1300 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Fiat car models :
|
The listed Fiat models will give information about C0990 DTC.
|
