C1285 DTC For Chrysler Prowler
Chrysler Prowler Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposite Piston Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Chrysler Prowler engine control system detects a problem, the computer stores the diagnostic trouble
code C1285 in its memory.
To figure out what is wrong with your vehicle you must first extract the C1285 DTC For Chrysler Prowler.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check C1285 Chrysler Prowler that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
C1285 Chrysler Prowler DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 1 |
MFG - Manufacturer Specific |
| 2 |
Computer And Auxiliary Outputs |
| 8 |
Crankshaft Position Sensor Circuit Performance |
| 5 |
Cruise Inhibit Control Circuit |
If your vehicle failed a C1285 Chrysler Prowler test and the C1285 Check Engine Light is NOT on, chances are you have a problem with the OBDII system, a burned out MIL lamp, or a faulty catalytic converter. The converter is essentially an afterburner that cleans up the exhaust after it exits the engine. The OBDII system uses C1285 a ownstream oxygen sensor to monitor the efficiency of the converter, and it should detect a drop in converter efficiency if the converter has been contaminated or is failing (ignition misfiring, leaky exhaust valves, and oil burning can all damage the converter). What you want to look C1285 DTC For Chrysler Prowler: Any conditions that might cause ignition misfire, an overly rich or lean fuel condition, or loss of compression.
You can also check other Chrysler car models :
|
The listed Chrysler models will give information about C1285 DTC.
|
