C12F4 DTC For Toyota Progres
Toyota Progres Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Supercharged Engine |
Your Toyota Progres engine control system detects a problem, the computer stores the diagnostic trouble
code C12F4 in its memory.
To figure out what is wrong with your vehicle you must first extract the C12F4 DTC For Toyota Progres.
Another consequence of C12F4 Toyota Progres engine overheating may be a blown head gasket. Heat makes aluminum swell almost three times faster than cast iron. Thermal stress can distort the head and make it swell in areas that are hottest like those between exhaust valves in adjoining cylinders, and areas that have restricted coolant flow like the narrow area that separates the cylinders. The typical aluminum head swells most in the middle, which can crush the head gasket if the head gets too hot. This will usually cause the head gasket to leak compression between adjacent cylinders, or leak coolant into the cylinders.
C12F4 Toyota Progres DTC Meaning
C |
Chassis Code - Problem is controller area network wiring bus and modules. |
1 |
MFG - Manufacturer Specific |
2 |
Computer And Auxiliary Outputs |
F |
BBV Sensor Circuit Low Voltage |
4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C12F4 Toyota Progres code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Toyota car models :
The listed Toyota models will give information about C12F4 DTC.
|