C12F5 DTC For Toyota Passo
Toyota Passo Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | V-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Toyota Passo engine control system detects a problem, the computer stores the diagnostic trouble
code C12F5 in its memory.
To figure out what is wrong with your vehicle you must first extract the C12F5 DTC For Toyota Passo.
To solve C12F5 Toyota Passo problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
C12F5 Toyota Passo DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 1 |
MFG - Manufacturer Specific |
| 2 |
Computer And Auxiliary Outputs |
| F |
BBV Sensor Circuit Low Voltage |
| 5 |
Cruise Inhibit Control Circuit |
The rule of C12F5 Toyota Passo code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of C12F5. Likewise, overriding the OBD C12F5 DTC For Toyota Passo system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.
You can also check other Toyota car models :
|
The listed Toyota models will give information about C12F5 DTC.
|
