C1302 DTC For Toyota Pod
Toyota Pod Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | V-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Toyota Pod engine control system detects a problem, the computer stores the diagnostic trouble
code C1302 in its memory.
To figure out what is wrong with your vehicle you must first extract the C1302 DTC For Toyota Pod.
A good ground connection is also extremely important. C1302 Toyota Pod engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
C1302 Toyota Pod DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 1 |
MFG - Manufacturer Specific |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
| 2 |
Kick-Down Switch Failed Short |
The original multi-displacement system turned off opposite pairs of cylinders, allowing the engine to have three different configurations and displacements. C1302 Toyota Pod code had an elaborate diagnostics procedure, including showing engine trouble codes on the air conditionning display. However, the system was troublesome, misunderstood by customers, and a rash of unpredictable failures led to the technology being quickly retired.
You can also check other Toyota car models :
|
The listed Toyota models will give information about C1302 DTC.
|
