C1317 DTC For Toyota 4500
Toyota 4500 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Toyota 4500 engine control system detects a problem, the computer stores the diagnostic trouble
code C1317 in its memory.
To figure out what is wrong with your vehicle you must first extract the C1317 DTC For Toyota 4500.
Another consequence of C1317 Toyota 4500 engine overheating may be a blown head gasket. Heat makes aluminum swell almost three times faster than cast iron. Thermal stress can distort the head and make it swell in areas that are hottest like those between exhaust valves in adjoining cylinders, and areas that have restricted coolant flow like the narrow area that separates the cylinders. The typical aluminum head swells most in the middle, which can crush the head gasket if the head gets too hot. This will usually cause the head gasket to leak compression between adjacent cylinders, or leak coolant into the cylinders.
C1317 Toyota 4500 DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 1 |
MFG - Manufacturer Specific |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 1 |
IC Circuit High Voltage |
| 7 |
Cruise Control System - Vehicle Accel Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C1317 Toyota 4500 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Toyota car models :
|
The listed Toyota models will give information about C1317 DTC.
|
