C1318 DTC For Toyota Vista
Toyota Vista Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Toyota Vista engine control system detects a problem, the computer stores the diagnostic trouble
code C1318 in its memory.
To figure out what is wrong with your vehicle you must first extract the C1318 DTC For Toyota Vista.
On 1999 and later C1318 Toyota Vista engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
C1318 Toyota Vista DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 1 |
MFG - Manufacturer Specific |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 1 |
IC Circuit High Voltage |
| 8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
When you turn on the ignition, the Service Engine Soon or Check Engine C1318 Toyota Vista light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If C1318 DTC For Toyota Vista so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the C1318!
You can also check other Toyota car models :
|
The listed Toyota models will give information about C1318 DTC.
|
