C1334 DTC For Toyota Auris
Toyota Auris Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposite Piston Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Toyota Auris engine control system detects a problem, the computer stores the diagnostic trouble
code C1334 in its memory.
To figure out what is wrong with your vehicle you must first extract the C1334 DTC For Toyota Auris.
A good ground connection is also extremely important. C1334 Toyota Auris engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
C1334 Toyota Auris DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 1 |
MFG - Manufacturer Specific |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 3 |
Low Coolant Circuit |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
If your C1334 Toyota Auris check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C1334 and engine control unit are in charge of monitoring a bunch of different C1334 DTC For Toyota Auris, and if they get a reading that's a little out of whack, up pops the check engine light.
You can also check other Toyota car models :
|
The listed Toyota models will give information about C1334 DTC.
|
