C1339 DTC For Toyota Avalon Ii
Toyota Avalon Ii Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Toyota Avalon Ii engine control system detects a problem, the computer stores the diagnostic trouble
code C1339 in its memory.
To figure out what is wrong with your vehicle you must first extract the C1339 DTC For Toyota Avalon Ii.
To solve C1339 Toyota Avalon Ii problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
C1339 Toyota Avalon Ii DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 1 |
MFG - Manufacturer Specific |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 3 |
Low Coolant Circuit |
| 9 |
A/C System High Pressure High Temperature |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the C1339 Toyota Avalon Ii code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Toyota car models :
|
The listed Toyota models will give information about C1339 DTC.
|
