C1360 DTC For Toyota Progres
Toyota Progres Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Toyota Progres engine control system detects a problem, the computer stores the diagnostic trouble
code C1360 in its memory.
To figure out what is wrong with your vehicle you must first extract the C1360 DTC For Toyota Progres.
C1360 Toyota Progres engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
C1360 Toyota Progres DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 1 |
MFG - Manufacturer Specific |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 6 |
Vehicle Speed Output Circuit |
| 0 |
Transmission Engaged At High Throttle Angle |
When you turn on the ignition, the Service Engine Soon or Check Engine C1360 Toyota Progres light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If C1360 DTC For Toyota Progres so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the C1360!
You can also check other Toyota car models :
|
The listed Toyota models will give information about C1360 DTC.
|
