C1364 DTC For Ferrari Modulo
Ferrari Modulo Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Turbocharged Engine |
Your Ferrari Modulo engine control system detects a problem, the computer stores the diagnostic trouble
code C1364 in its memory.
To figure out what is wrong with your vehicle you must first extract the C1364 DTC For Ferrari Modulo.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check C1364 Ferrari Modulo that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
C1364 Ferrari Modulo DTC Meaning
C |
Chassis Code - Problem is controller area network wiring bus and modules. |
1 |
MFG - Manufacturer Specific |
3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
6 |
Vehicle Speed Output Circuit |
4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C1364 Ferrari Modulo code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Ferrari car models :
The listed Ferrari models will give information about C1364 DTC.
|