C1404 DTC For Toyota Passo
Toyota Passo Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposite Piston Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Toyota Passo engine control system detects a problem, the computer stores the diagnostic trouble
code C1404 in its memory.
To figure out what is wrong with your vehicle you must first extract the C1404 DTC For Toyota Passo.
A good ground connection is also extremely important. C1404 Toyota Passo engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
C1404 Toyota Passo DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 1 |
MFG - Manufacturer Specific |
| 4 |
Fuel And Air Metering (Injector Circuit Malfunctions Only) |
| 0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
If your C1404 Toyota Passo check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C1404 and engine control unit are in charge of monitoring a bunch of different C1404 DTC For Toyota Passo, and if they get a reading that's a little out of whack, up pops the check engine light.
You can also check other Toyota car models :
|
The listed Toyota models will give information about C1404 DTC.
|
