C1996 DTC For Peugeot 1007
Peugeot 1007 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Peugeot 1007 engine control system detects a problem, the computer stores the diagnostic trouble
code C1996 in its memory.
To figure out what is wrong with your vehicle you must first extract the C1996 DTC For Peugeot 1007.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check C1996 Peugeot 1007 that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
C1996 Peugeot 1007 DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 1 |
MFG - Manufacturer Specific |
| 9 |
Transmission |
| 9 |
TP Sensor Learn Not Complete |
| 6 |
Transmission Control Module Reprogrammable Memory |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C1996 Peugeot 1007 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Peugeot car models :
|
The listed Peugeot models will give information about C1996 DTC.
|
