C2013 DTC For Peugeot 202
Peugeot 202 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | In-Line Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Peugeot 202 engine control system detects a problem, the computer stores the diagnostic trouble
code C2013 in its memory.
To figure out what is wrong with your vehicle you must first extract the C2013 DTC For Peugeot 202.
On 1999 and later C2013 Peugeot 202 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
C2013 Peugeot 202 DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 2 |
MFG - Manufacturer Specific |
| 0 |
Transmission |
| 1 |
IC Circuit High Voltage |
| 3 |
TFP Valve Position Switch-Drive Without Drive Ratio |
OBD C2013 Peugeot 202 code and tailpipe testing are two different approaches to identify vehicles in need of repair. The OBD system looks for broken or malfunctioning emissions control components and C2013, while tailpipe tests sample a vehicle's exhaust to see if it is above or below certain prescribed limits. Given the robust nature of today's emissions control components, it is entirely possible for an individual component to C2013 DTC For Peugeot 202 malfunction without leading to an immediate increase in emissions at the tailpipe. In such cases, other components (like the catalyst) can temporarily compensate for the part that is broken however, these other components can only do double duty for so long before they, too, begin to malfunction. In addition, OBD also monitors for C2013 DTC For Peugeot 202 and other malfunctions in the fuel system problems that traditional tailpipe tests were not designed to identify. Most state and local areas also include a gas cap pressure test as part of an emission inspection.
You can also check other Peugeot car models :
|
The listed Peugeot models will give information about C2013 DTC.
|
