C202C DTC For Peugeot Escapade

Peugeot Escapade Engine Specifications:
Engine Type :Multi-Cylinder Engine
Cylinder Type :W-Type Engine
Engine Air Intake Process :Naturally Aspirated

Your Peugeot Escapade engine control system detects a problem, the computer stores the diagnostic trouble code C202C in its memory. To figure out what is wrong with your vehicle you must first extract the C202C DTC For Peugeot Escapade.

C202C Peugeot Escapade engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)

C202C Peugeot Escapade DTC Meaning

C Chassis Code - Problem is controller area network wiring bus and modules.
2 MFG - Manufacturer Specific
0 Transmission
2 Cruise Control Servo Indicates Low
C TFP Valve Position Switch-Drive Without Drive Ratio

There are currently two main types of cylinder deactivation used today, depending on the type of engine. C202C Peugeot Escapade code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.

C202A DTC (Previous DTC Code) ( Next DTC Code ) C202D DTC
You can also check other Peugeot car models :
The listed Peugeot models will give information about C202C DTC.