C2036 Peugeot 2008 DTC Code

Peugeot 2008 Engine Specifications:

Engine Type :	Multi-Cylinder Engine
Cylinder Type :	W-Type Engine
Engine Air Intake Process :	Naturally Aspirated

Your Peugeot 2008 engine control system detects a problem, the computer stores the diagnostic trouble code C2036 in its memory. To figure out what is wrong with your vehicle you must first extract the C2036 DTC For Peugeot 2008.

C2036 Peugeot 2008 engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)

C2036 Peugeot 2008 DTC Meaning

C	Chassis Code - Problem is controller area network wiring bus and modules.
2	MFG - Manufacturer Specific
0	Transmission
3	Low Coolant Circuit
6	Transmission Control Module Reprogrammable Memory

There are currently two main types of cylinder deactivation used today, depending on the type of engine. C2036 Peugeot 2008 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.