C2414 DTC For Chevrolet Intimidator
Chevrolet Intimidator Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Chevrolet Intimidator engine control system detects a problem, the computer stores the diagnostic trouble
code C2414 in its memory.
To figure out what is wrong with your vehicle you must first extract the C2414 DTC For Chevrolet Intimidator.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check C2414 Chevrolet Intimidator that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
C2414 Chevrolet Intimidator DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 2 |
MFG - Manufacturer Specific |
| 4 |
Fuel And Air Metering (Injector Circuit Malfunctions Only) |
| 1 |
IC Circuit High Voltage |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the C2414 Chevrolet Intimidator code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Chevrolet car models :
|
The listed Chevrolet models will give information about C2414 DTC.
|
