C2422 DTC For Chevrolet Impala 9
Chevrolet Impala 9 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Chevrolet Impala 9 engine control system detects a problem, the computer stores the diagnostic trouble
code C2422 in its memory.
To figure out what is wrong with your vehicle you must first extract the C2422 DTC For Chevrolet Impala 9.
To solve C2422 Chevrolet Impala 9 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
C2422 Chevrolet Impala 9 DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 2 |
MFG - Manufacturer Specific |
| 4 |
Fuel And Air Metering (Injector Circuit Malfunctions Only) |
| 2 |
Cruise Control Servo Indicates Low |
| 2 |
Kick-Down Switch Failed Short |
When you turn on the ignition, the Service Engine Soon or Check Engine C2422 Chevrolet Impala 9 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If C2422 DTC For Chevrolet Impala 9 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the C2422!
You can also check other Chevrolet car models :
|
The listed Chevrolet models will give information about C2422 DTC.
|
