C2447 DTC For Chevrolet Corvette C5
Chevrolet Corvette C5 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Chevrolet Corvette C5 engine control system detects a problem, the computer stores the diagnostic trouble
code C2447 in its memory.
To figure out what is wrong with your vehicle you must first extract the C2447 DTC For Chevrolet Corvette C5.
To solve C2447 Chevrolet Corvette C5 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
C2447 Chevrolet Corvette C5 DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 2 |
MFG - Manufacturer Specific |
| 4 |
Fuel And Air Metering (Injector Circuit Malfunctions Only) |
| 4 |
Control Module Throttle Actuator Position Performance |
| 7 |
Cruise Control System - Vehicle Accel Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C2447 Chevrolet Corvette C5 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Chevrolet car models :
|
The listed Chevrolet models will give information about C2447 DTC.
|
