C2640 DTC For Chrysler Avenger
Chrysler Avenger Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Chrysler Avenger engine control system detects a problem, the computer stores the diagnostic trouble
code C2640 in its memory.
To figure out what is wrong with your vehicle you must first extract the C2640 DTC For Chrysler Avenger.
On 1999 and later C2640 Chrysler Avenger engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
C2640 Chrysler Avenger DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 2 |
MFG - Manufacturer Specific |
| 6 |
Vehicle Speed Control And Idle Control System |
| 4 |
Control Module Throttle Actuator Position Performance |
| 0 |
Transmission Engaged At High Throttle Angle |
When you turn on the ignition, the Service Engine Soon or Check Engine C2640 Chrysler Avenger light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If C2640 DTC For Chrysler Avenger so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the C2640!
You can also check other Chrysler car models :
|
The listed Chrysler models will give information about C2640 DTC.
|
