C2654 DTC For Chrysler Phaeton
Chrysler Phaeton Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Chrysler Phaeton engine control system detects a problem, the computer stores the diagnostic trouble
code C2654 in its memory.
To figure out what is wrong with your vehicle you must first extract the C2654 DTC For Chrysler Phaeton.
C2654 Chrysler Phaeton engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
C2654 Chrysler Phaeton DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 2 |
MFG - Manufacturer Specific |
| 6 |
Vehicle Speed Control And Idle Control System |
| 5 |
BBV Sensor Circuit Low Voltage |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
When you turn on the ignition, the Service Engine Soon or Check Engine C2654 Chrysler Phaeton light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If C2654 DTC For Chrysler Phaeton so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the C2654!
You can also check other Chrysler car models :
|
The listed Chrysler models will give information about C2654 DTC.
|
