C2821 DTC For Dkw F93
Dkw F93 Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Naturally Aspirated |
Your Dkw F93 engine control system detects a problem, the computer stores the diagnostic trouble
code C2821 in its memory.
To figure out what is wrong with your vehicle you must first extract the C2821 DTC For Dkw F93.
On 1999 and later C2821 Dkw F93 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
C2821 Dkw F93 DTC Meaning
C |
Chassis Code - Problem is controller area network wiring bus and modules. |
2 |
MFG - Manufacturer Specific |
8 |
Accelerator Pedal Position (APP) Sensor 1 Performance |
2 |
Cruise Control Servo Indicates Low |
1 |
PCM Stack Overrun |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C2821 Dkw F93 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Dkw car models :
The listed Dkw models will give information about C2821 DTC.
|