C2921 DTC For Chevrolet Equinox 3
Chevrolet Equinox 3 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Chevrolet Equinox 3 engine control system detects a problem, the computer stores the diagnostic trouble
code C2921 in its memory.
To figure out what is wrong with your vehicle you must first extract the C2921 DTC For Chevrolet Equinox 3.
On 1999 and later C2921 Chevrolet Equinox 3 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
C2921 Chevrolet Equinox 3 DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 2 |
MFG - Manufacturer Specific |
| 9 |
Transmission |
| 2 |
Cruise Control Servo Indicates Low |
| 1 |
PCM Stack Overrun |
When you turn on the ignition, the Service Engine Soon or Check Engine C2921 Chevrolet Equinox 3 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If C2921 DTC For Chevrolet Equinox 3 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the C2921!
You can also check other Chevrolet car models :
|
The listed Chevrolet models will give information about C2921 DTC.
|
