C3166 DTC For Daewoo Mantica
Daewoo Mantica Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Daewoo Mantica engine control system detects a problem, the computer stores the diagnostic trouble
code C3166 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3166 DTC For Daewoo Mantica.
A good ground connection is also extremely important. C3166 Daewoo Mantica engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
C3166 Daewoo Mantica DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 3 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 6 |
Vehicle Speed Output Circuit |
| 6 |
Transmission Control Module Reprogrammable Memory |
When you turn on the ignition, the Service Engine Soon or Check Engine C3166 Daewoo Mantica light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If C3166 DTC For Daewoo Mantica so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the C3166!
You can also check other Daewoo car models :
|
The listed Daewoo models will give information about C3166 DTC.
|
