C3167 DTC For Daewoo Nubira
Daewoo Nubira Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Daewoo Nubira engine control system detects a problem, the computer stores the diagnostic trouble
code C3167 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3167 DTC For Daewoo Nubira.
A good ground connection is also extremely important. C3167 Daewoo Nubira engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
C3167 Daewoo Nubira DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 3 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 6 |
Vehicle Speed Output Circuit |
| 7 |
Cruise Control System - Vehicle Accel Too High |
When you turn on the ignition, the Service Engine Soon or Check Engine C3167 Daewoo Nubira light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If C3167 DTC For Daewoo Nubira so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the C3167!
You can also check other Daewoo car models :
|
The listed Daewoo models will give information about C3167 DTC.
|
