C3171 DTC For Daewoo Bucrane
Daewoo Bucrane Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Daewoo Bucrane engine control system detects a problem, the computer stores the diagnostic trouble
code C3171 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3171 DTC For Daewoo Bucrane.
On 1999 and later C3171 Daewoo Bucrane engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
C3171 Daewoo Bucrane DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 3 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 7 |
Exhaust Gas Recirculation System Valve 1 |
| 1 |
PCM Stack Overrun |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the C3171 Daewoo Bucrane code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Daewoo car models :
|
The listed Daewoo models will give information about C3171 DTC.
|
