C3185 DTC For Daewoo No 1
Daewoo No 1 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposite Piston Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Daewoo No 1 engine control system detects a problem, the computer stores the diagnostic trouble
code C3185 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3185 DTC For Daewoo No 1.
To solve C3185 Daewoo No 1 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
C3185 Daewoo No 1 DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 3 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 8 |
Crankshaft Position Sensor Circuit Performance |
| 5 |
Cruise Inhibit Control Circuit |
If your C3185 Daewoo No 1 check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C3185 and engine control unit are in charge of monitoring a bunch of different C3185 DTC For Daewoo No 1, and if they get a reading that's a little out of whack, up pops the check engine light.
You can also check other Daewoo car models :
|
The listed Daewoo models will give information about C3185 DTC.
|
