C3193 DTC For Daewoo Tosca
Daewoo Tosca Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Daewoo Tosca engine control system detects a problem, the computer stores the diagnostic trouble
code C3193 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3193 DTC For Daewoo Tosca.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check C3193 Daewoo Tosca that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
C3193 Daewoo Tosca DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 3 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 9 |
TP Sensor Learn Not Complete |
| 3 |
TFP Valve Position Switch-Drive Without Drive Ratio |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the C3193 Daewoo Tosca code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Daewoo car models :
|
The listed Daewoo models will give information about C3193 DTC.
|
