C3194 DTC For Daewoo Korando
Daewoo Korando Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Daewoo Korando engine control system detects a problem, the computer stores the diagnostic trouble
code C3194 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3194 DTC For Daewoo Korando.
A good ground connection is also extremely important. C3194 Daewoo Korando engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
C3194 Daewoo Korando DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 3 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 9 |
TP Sensor Learn Not Complete |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C3194 Daewoo Korando code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Daewoo car models :
|
The listed Daewoo models will give information about C3194 DTC.
|
