C3196 DTC For Daewoo Matiz
Daewoo Matiz Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Daewoo Matiz engine control system detects a problem, the computer stores the diagnostic trouble
code C3196 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3196 DTC For Daewoo Matiz.
A good ground connection is also extremely important. C3196 Daewoo Matiz engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
C3196 Daewoo Matiz DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 3 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 9 |
TP Sensor Learn Not Complete |
| 6 |
Transmission Control Module Reprogrammable Memory |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C3196 Daewoo Matiz code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Daewoo car models :
|
The listed Daewoo models will give information about C3196 DTC.
|
