C3387 DTC For Mercedes Benz R Class
Mercedes Benz R Class Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Mercedes Benz R Class engine control system detects a problem, the computer stores the diagnostic trouble
code C3387 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3387 DTC For Mercedes Benz R Class.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check C3387 Mercedes Benz R Class that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
C3387 Mercedes Benz R Class DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 3 |
SAE - Generic |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 8 |
Crankshaft Position Sensor Circuit Performance |
| 7 |
Cruise Control System - Vehicle Accel Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C3387 Mercedes Benz R Class code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about C3387 DTC.
|
