C3391 DTC For Mercedes Benz 170
Mercedes Benz 170 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Mercedes Benz 170 engine control system detects a problem, the computer stores the diagnostic trouble
code C3391 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3391 DTC For Mercedes Benz 170.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check C3391 Mercedes Benz 170 that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
C3391 Mercedes Benz 170 DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 3 |
SAE - Generic |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 9 |
TP Sensor Learn Not Complete |
| 1 |
PCM Stack Overrun |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C3391 Mercedes Benz 170 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about C3391 DTC.
|
