C3392 DTC For Mercedes S55 Amg
Mercedes S55 Amg Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Mercedes S55 Amg engine control system detects a problem, the computer stores the diagnostic trouble
code C3392 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3392 DTC For Mercedes S55 Amg.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check C3392 Mercedes S55 Amg that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
C3392 Mercedes S55 Amg DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 3 |
SAE - Generic |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 9 |
TP Sensor Learn Not Complete |
| 2 |
Kick-Down Switch Failed Short |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C3392 Mercedes S55 Amg code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about C3392 DTC.
|
