C3393 DTC For Mercedes E 32
Mercedes E 32 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposite Piston Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Mercedes E 32 engine control system detects a problem, the computer stores the diagnostic trouble
code C3393 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3393 DTC For Mercedes E 32.
To solve C3393 Mercedes E 32 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
C3393 Mercedes E 32 DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 3 |
SAE - Generic |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 9 |
TP Sensor Learn Not Complete |
| 3 |
TFP Valve Position Switch-Drive Without Drive Ratio |
If your C3393 Mercedes E 32 check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C3393 and engine control unit are in charge of monitoring a bunch of different C3393 DTC For Mercedes E 32, and if they get a reading that's a little out of whack, up pops the check engine light.
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about C3393 DTC.
|
