C3407 DTC For Monteverdi High Speed
Monteverdi High Speed Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Naturally Aspirated |
Your Monteverdi High Speed engine control system detects a problem, the computer stores the diagnostic trouble
code C3407 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3407 DTC For Monteverdi High Speed.
To solve C3407 Monteverdi High Speed problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
C3407 Monteverdi High Speed DTC Meaning
C |
Chassis Code - Problem is controller area network wiring bus and modules. |
3 |
SAE - Generic |
4 |
Fuel And Air Metering (Injector Circuit Malfunctions Only) |
0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
7 |
Cruise Control System - Vehicle Accel Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C3407 Monteverdi High Speed code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Monteverdi car models :
The listed Monteverdi models will give information about C3407 DTC.
|